Bionomic 6500 jet ejector venturi scrubbers designed to cut engineering costs
Bionomic Industries, Inc., Minotola, NJ, says its Series 6500 jet ejector venturi scrubber is a fully integrated, pre-engineered, skid-mounted package complete with recirculation pumps, piping networks, entrainment separators, polishing scrubber, instrumentation, automated controls and more – all factory assembled and tested to lower engineering, installation, and project costs while reducing lead times for quicker installation and on-time operation.
Units for outdoor installation are available with a freeze protection package. All systems have the necessary dimensional, weight and instructional information along with a system P&ID and process flow diagram giving all material balances.
The ideal scrubber for low to moderate gas volumes from 5 to 60,000 cfm when gaseous and/or particulate contaminant removal is required, the Series 6500 jet scrubber creates its own draft to eliminate the need for a fan in most cases, resulting in cost savings and system simplification. Inherent with this design, gas is scrubbed with no bypass, so the unit can be used for large turndowns in gas flows. The high scrubbing liquidto- gas ratio also makes it a choice for treating high concentration gas streams to reduce the resultant exothermic reaction temperature rise of the scrubbing liquid.
Series 6500 jet scrubbers are available in single and multiple stages, or can be combined with a Series 5000 packed bed polishing scrubber with additional transfer units to meet extremely high gaseous contaminant removal efficiencies. A choice of entrainment separator types – baffle, cyclonic and fiber, or chevron blade modules – enables the Series 6500 jet ejector venturi scrubber to handle a wide range of pollutants. All separator types can be integrated with scrubbing liquid recycle tanks in capacities and configurations designed to meet a particular application.
Bionomic Industries, Inc., www.bionomicind.com